Brocade Communications Systems BR-1020 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 88)

70 Brocade Adapters Troubleshooting Guide

53-1001253-01

Collecting port data

3. Click the SFP tab in the right pane.

Port power on management

Use the Port POM properties panel to monitor the SFP attributes. A notification is given for any

parameters that are not within the power, temperature, voltage, and current specification.

1. Select a port in the device tree.

2. Click the POM tab in the right pane.

Collecting port data

This section provides an overview of BCU commands and HCM features that provide information on

adapter ports. such as port WWN, node WWN, port type, configured speed, operating speed,

configured topology, operating topology. link and port beaconing state, and other information.

Displaying base port properties

Use the Base Port Properties panel to display information about a selected base adapter port, such

as the following:

• Port number

• PWWN and node WWN

• Offline or online state

• Role of port (for example, FCP initiator)

• Fibre Channel address

• WWN of the attached switch

Use the following steps to display base port properties.

1. From the device tree, select a base port.

2. In the right panel, click the Base Port Properties tab.

Displaying CEE port properties (CNA only)

Use the CEE Port Properties panel to display information for a selected converged Ethernet adapter

(CEE) port.

Information such as the following displays:

• Node WWN

• PWWN

• Port type

• Fibre Channel address

• CEE online or offline state

• Local port MAC address

• Configured port speed

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 109 110

Keine Kommentare

Brocade Communications Systems BR-1020 Anleitung zur Fehlerbehebung Seite 88